Shimano Ultegra RT800 centerlock disc rotors. - Aluminum spider - Includes standard type rotor lockring - Freeza technology, 3-layer structure with aluminum core and stainless steel outer layers and additional aluminum cooling fins reduces rotor surface temperature approximately 150 degrees Celsius compared to all-steel rotors - Requires external-type rotor lockring when installing onto 15/20mm axle hub - Hub/Disc Compatibility: Center-Lock Disc - Pad Compatibility: All Pad Compounds - Rotor Type: Two Piece
$72.00 - $78.00
SRAM's CenterLine X rotors are light-weight, quiet, smooth and robust, featuring a two-piece design with an aluminum center and steel brake track. 6-bolt rotors include titanium rotor bolts.
• 140mm CenterLock Ice-Tech Rotor • Aluminum core construction • Lowers operating temperature • Resists power fade • Increases pad life
Shimano's XT Ice-Tech rotors utilize their patented Center Lock mounting system for super quick and easy mounting. These rotors use an aluminum core with steel outer plates which reduces the temperature of the braking surface. This means quieter braking, and more importantly, less fade on long downhill sections and improved pad life. The various sizes give you total freedom of choice over the delicate balance of power versus weight.
-Single compound cartridge road brake pad inserts
-PSLR-O wheelsystem carbon brake pad inserts
$35.99 - $46.99
- 3-layer structure with aluminum core and two stainless steel outer layers reduces rotor surface temperature approximately 100 degrees Celsius compared to all-steel rotors -Requires external-type rotor lockring when installing onto 15/20mm axle hub -Aluminum spider -Includes standard type rotor lockring
$25.00 - $30.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
Fit for modern times. The updated SRAM Force brakeset pairs mechanical rim braking with our wireless Force eTap AXS group. The dual pivot design also accounts for wider road tires without compromising braking power. - Dual pivot design increases braking power and enhances progressive feel - Wider clearance for modern tires and wheelsets (up to 28c) - Updated finish to match SRAM Force eTap AXS - Includes SwissStop pads: Platinum Flash Pro pad (carbon rims) or BHP pad (aluminum rims) - Pad type: Cartridge - Reach: Standard
Clean up your handlebar with Avid's MatchMaker X clamp. It combines mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can shed grams and keep your bars nice and tidy. You can also integrate RockShox's XLoc remote for maximum convenience and ease of use.
Shimano Deore XT SM-RT86 6-Bolt rotors feature a 3-layer construction with an aluminum core and two stainless steel outer layers. Reducing rotor surface temperature approximately 100 degrees Celsius compared to all-steel rotors, the result is better braking performance and reduced brake fade. - Aluminum spider - Includes rotor fixing bolts and locking washers
The Eagle 2 is a revolutionary pad that first utilized the hardened reinforced steel internal backbone. This larger pad has been used in all areas of cycling and is a good choice when frame, wheel and fork design allow. Features: - Hardened and Plated reinforced steel backbone - Patented Angled tip plow - Water grooves - Pad-Lock washer system - Available in Threaded and 2024 Aluminum Smooth Post Black: standard compound designed for dry condition riding Red: semi-aggressive compound for good performance Salmon: aggressive compound for extreme weather conditions Dual: combination of Salmon and Black compounds for more controlled, smoother stopping
$10.00 - $11.00
• Durable organic pad compound • Quiet and powerful braking performance for all weather conditions
As a front lever for your Rival 1 set-up, or paired for single speed adventures, the new Rival brake lever features the same ErgoFit ergonomic design introduced on SRAM RED but delivered in a sleek, forged aluminum offer. SRAM Reach Adjust feature brings near universal fit for riders. - Weight: 260 grams per lever (no cables) - Lever Material: Aluminum - Finish: Black - Adjustment: Reach Adjust
One of the key elements of riding performance is control. The more you have, the more confident you’ll feel and the more you’ll enjoy the ride. Powerful, consistent braking performance gives you more control and elevates your riding performance. The innovative new Conduct hydraulic brake system introduces Absolute Braking Stability to deliver a new level of smooth, consistent braking power in both dry and wet conditions. Here are the three performance benefits you’ll experience when you ride Conduct hydraulic brakes. Features - The Giant Conduct Brake System allows you to convert your mechanical disc brake setup to a semi-hydraulic system - Cable-actuated master cylinder is fully integrated into the stem faceplate creating a clean, aero-looking design - Simply shorten the current cable housing and cables on the bike to mount and setup the new master cylinder on your current Giant Contact or Contact SL stem - No need to replace the brake lever/shifter or bar tape - Tests show significantly improved braking in both dry and wet conditions - Compared to a Shimano 105 full-hydraulic system resulted in a 21% improvement in dry conditions and 36% in wet conditions - Available in both Post Mount (160mm) and Flat Mount (140mm) configurations Kit includes: - Conduct master cylinder - Front and rear calipers with pads - Front and rear brake hose - Lever to master cylinder cable housing Conduct brake system will work only in combination with Giant Contact SL, Contact and Connect series stems. (Note: It does not fit with Contact SLR stems.)
SRAM's Force CX1 Hydraulic Brake and Brake Lever is descended from their top-end RED road group, representing SRAM's attempt at perfecting the interface between cyclocross rider and bike, and maximizing braking performance. Designed for a 1 x 11-speed setup, this left-side, hydraulic-brake-only carbon lever is simple and effective. The ErgoFit textured body improves grip and finger wrap with reduced diameter, providing better control and a better transition to the bar. For optimal feel, you can also set your lever reach to fit your hands thanks to Reach Adjust.
SRAM's Force 1 Hydraulic Brake and Brake Lever is descended from their top-end RED road group, representing SRAM's attempt at perfecting the interface between rider and bike and maximizing braking performance. Designed for a 1 x 11-speed setup, this left-side rear hydraulic-brake carbon lever has the same shape and feel as the Force 1 right lever, but has no shift paddle. The ErgoFit textured body improves grip and finger wrap with reduced diameter, providing better control and a better transition to the bar. For optimal feel, you can also set your lever reach to fit your hands thanks to Reach Adjust. The brakes themselves provide incredible modulation and stopping power. You'll never go back to rim brakes again! - The moto-style set up allows you to hook up your left brake lever to your rear wheel. - Carbon fiber lever blade - Bleed port is easily accessed
$24.00 - $30.00
SRAM's Disc Brake Pads are reliable and rugged. These pads are compatible with Avid Trail and SRAM Guide disc brakes.
Shimano G04S metal disc brake pads. - Fits XTR BR-M9000, BR-M9020, BR-M985, XT BR-M8000, BR-M785, SLX BR-M666, Alfine BR-S700 and BR-R785, BR-RS785 road disc calipers - Sintered Metal pad with consistent, high stopping power in wet or dry conditions and excellent durability - Ventilated steel backing plate for improved heat dispersion - Backing Plate Material: Steel - Compound: Metal
$52.99 - $64.99
Shimano Deore XT RT-MT800 Center Lock disc brake rotors feature an advanced heat-dissipating design. - Rotor construction uses Shimano Freeza technology to boost heat dissipation and reduce fade - Quick and easy installation with spline mount and lock ring (included) - Compatible with metal and resin pads
Shimano Road brake shoe sets. - R55C4 pads - Light weight magnesium pad holder
$15.00 - $16.00
• Grooved heat-dissipating back plate design • Durable organic pad compound • Quiet and powerful braking performance for all weather conditions
Mount Giant's Auxiliary Brake Levers to your road bike's drop handlebar and gain a secondary braking position on the top of your bars. Great for bike tourists, commuters, and any rider who want braking control while sitting up on their bike.
-Single compound cartridge road brake pads
-3XC triple compound cartridge road brake pads
Shimano Alivio hydraulic disc brake sets offer reliable and powerful braking, along with pre-bled hoses for convenient installation. - BL-MT200 hydraulic disc brake lever - BR-MT200 hydraulic disc brake caliper - Rotor sold separately
-Molded road brake pads
SRAM road disc brake pads are designed for use with SRAM road hydraulic disc brakes (HRD). - For use with Level Ultimate & Level TLM Brakes - Pad Material: Organic - Type: Road/CX - Includes guide pin, clip, & pad spreader
• Truly universal compatibility (adjustable cable pull for linear/mech disc or caliper/cantilever) • 22.2mm (7/8") clamp • Return spring/reach adjustment • Forged aluminum construction • 2-finger lever design
The SRAM RED brakeset improves on all fronts: it’s lighter, more aerodynamic and leverages more braking power. What’s more, it features broader tire clearance. A classic made modern. - AeroLink arm amplifies braking power while reducing frontal area - Lighter, aero pad retainers carry SwissStop Flash Pro pads standard - Aero design extends to the shape of the indexed four-position quick release - Wider clearance for modern tires and wheelsets (up to 28c) - Updated finish to match new SRAM RED eTap AXS - Reach: Standard
Page 1 of 3 Next page